[ Chinese wardrobe net ] custom wardrobe can be divided into a lot of sheet custom, then wood board custom closet? Today, the website will tell you the advantages and disadvantages of custom-made wardrobes for wood panels.
Brief introduction of woodworking board custom wardrobe:
The custom-made wardrobe of wood board has been affirmed by the market. The wood board is commonly known as the large core board. It is made up of two pieces of veneer in the middle. The total thickness of the double-sided adhesive veneers of the blockboard shall not be less than 3 mm. The corner defects of all kinds of blockboard shall not exceed 5mm in the nominal width and shall not exceed 20mm in length. The middle wooden board is made of high-quality natural wood board after heat treatment (ie drying in the drying room), and processed into a certain specification of wood strips, which are formed by splicing machine. The spliced ​​wooden board is covered with two layers of high-quality veneers on both sides, and then pressed by cold and hot press.
Advantages and disadvantages of custom-made wardrobes for wood board:
The advantages of woodworking board custom wardrobe:
Compared with particleboard and medium density fiberboard, blockboard is more suitable for human natural ecology than its medium density fiberboard. It has the advantages of light weight, easy processing, good nail holding power and no deformation. It is interior decoration and high-grade furniture production. The ideal material.
1. Blockboard has good screw strength, high strength, and has the characteristics of firmness, sound absorption and heat insulation. The moisture content of blockboard is not high, between 10% and 13%, it is easy to process and is used for furniture, doors and windows. Sets, partitions, false walls, heating covers, curtain boxes, etc., are the most widely used.
2. Since the interior is solid wood strip, the requirements for processing equipment are not high, which is convenient for on-site construction.
The disadvantages of woodworking board custom wardrobe:
1. Due to the large use of urethane glue in the production process of wood board, the formaldehyde emission is generally high, and the environmental protection standards are generally low, which is why most wood board tastes pungent.
2. At present, most of the wood board in the market is cut corners during production. When the solid wood strip is spliced, the gap is large, and there is a void inside the board. If the nail is nailed in the gap, there is basically no nail holding force.
3. The solid wood strip inside the wood board is longitudinally spliced, so the vertical bending resistance is poor, and the long-term force will cause obvious lateral deformation of the board.
4. Blockboard is more stable than solid wood, but it is afraid of moisture. It should be avoided in the kitchen during construction.
5. The solid wood strip inside the wood board is different in material, the density is different, only after simple drying treatment, it is easy to warp and deform; the structure is distorted and deformed, which affects the appearance and use effect.
6. Due to the rough surface of the wood board, when the woodworking site is processed, a large amount of glue or paint is usually used for the surface treatment. Therefore, the furniture made from the board is not environmentally friendly, which is also the decoration time.
The processing technology of blockboard is divided into two types: machine and hand. Hand-made is to manually insert the wooden strip into the splint. The wooden strip is subjected to less pressing force, uneven splicing, large gap, poor nail holding force, and cannot be sawed and processed. It is only suitable for sub-projects of partial decoration. Such as the solid wood floor cushion board and so on. The plate of the machine is subjected to a large pressing force, the gap is extremely small, the splicing is flat, the bearing capacity is uniform, long-term use, compact structure and not easy to deform.
The website reminds consumers that the surface of a good blockboard is flat, no warping, no deformation, no blistering, no dents; the core strips are evenly arranged, the gap is small, the core strip is free from decay, breakage, wormholes, thrift and so on. Some blockboards cut corners, and the gap between the solid wood strips is large. If nails are nailed in the gap, there is basically no nail holding force. This will weaken the overall bearing capacity of the board, and the uneven long-term stress will cause the sheet structure to be distorted and deformed, affecting the appearance and use effect.
Decal Painting Tableware is loved by families all over the world, and consumers like the design of decals. Ceramic Decal Printing is delicate and moist, the pattern is clear, and each set of decal tableware is full of elegant temperament.
High-strength reinforced porcelain body, using high-quality porcelain clay, hygienic, healthy and environmentally friendly, high-temperature glaze color, high-temperature firing, meet lead and cadmium control standards, safe and non-toxic, resistant to scratches and not easy to fade. The glaze is smooth, easy to clean, practical and simple.Each product is carefully designed, drawing inspiration from life, beautiful and fashionable. High quality ceramics, crystal clear, high temperature firing, lead and cadmium free. Smooth glaze, white as jade, warm color, clear glaze. The world is big, just take a spoonful of porridge and a meal, and every meal is delicious.
Custom Ceramic Decals, Ceramic Decal Printing, Porcelain With Decal, Vintage Ceramic Decals
Henan WonkingChina I/E Co., Ltd. , https://www.wshousewares.com