In general, if the toilet is used for a long time, it will leak. Not only will it lead to waste of water resources, it will also make it difficult to use the toilet. Let's learn how to solve the problem of leaking toilets.
Toilet leaking common causes
1, some manufacturers blindly reduce production costs, use of inferior materials caused by the inlet valve inlet and inlet pipe itself cracking during injection molding, leading to seal failure, the water in the tank overflow valve overflow pipe into the toilet, resulting in "long flow."
2, excessive pursuit of miniaturization of water tank accessories, resulting in floating ball (or floating bucket) buoyancy is not enough, when the water submerged floating ball (or floating bucket), still can not make the inlet valve closed, so that water constantly flows into the tank, and finally Flow from the overflow pipe into the toilet caused leakage. This is especially true when the tap water pressure is high.
3, so that the water tank accessories agencies in the action of interference, resulting in leakage. For example, when the water tank is filled with water, the float and the float rod will affect the normal reset of the flap and cause water leakage. In addition, the float rod is too long, and the float ball is too large, causing friction with the tank wall and affecting the free rise and fall of the float ball, resulting in seal failure and water leakage.
4, the drainage valve joints are not strict. The non-disposable drainage valve is not tightly sealed at the joint, and under the effect of water pressure, water flows from the gap between the interfaces into the toilet through the overflow pipe, causing water leakage. Elevated inlet valves that can be freely changed in height will often leak if their sealing rings do not fit tightly with the wall.
Toilet leaking method
Check whether the flush switch is reset. Some plastic flushing switches in toilets wear out for a long time and occasionally get stuck. Generally repeated switching a few times can be reset. Check whether the drain rubber gasket under the ball valve is aging, the seal is not strict, and the problem needs to be replaced.
Check whether the connection between the ball float float and the water inlet switch of the water tank is loose, if the float is in place and the switch is not closed, resulting in non-stop water intake. After the water is full, it will flow out from the upright drain pipe. Just tighten the float and water valve switch connection. . If the rubber ball valve is damaged, the seal is not strict, and there is a leak. It needs to be replaced immediately.
The leakage of the water tank is basically a problem with the drain valve. Look at the rubber plug at the outlet of the tank. If the rubber plug at the outlet is damaged or if there is a blockage of foreign materials, the rubber plug will not be closed tightly. It will also cause more water to flow from the toilet. If the water pipe inside the tank is not placed correctly, it will have more or less effect.
After a series of investigations on the leaking problem of the toilet, it is no longer a problem to repair by hand!
<\p><\div>
Jiangsu Sleeptight Household Technology Co., Ltd. , https://www.sleeptightoem.com