[ Chinese wardrobe network ] Why do many people value the wardrobe panels? Because the quality of the wardrobe plate directly affects our health! Today, the website is a small series to tell you what the plates are made in the wardrobe! Which is more suitable for us?
There are several commonly used panels for wardrobes: particleboard. MDF. Fir boards. Multi-layer solid wood panels. (Of course there are others)
First, particle board (not recommended - there are a lot of panel furniture are this material)
Particleboard (also known as solid wood particle board) is a piece of wood or other wood fiber material that is cut into a certain size as a raw material. After drying, it is mixed with an adhesive, a hardener, a waterproofing agent, and pressed under heat, pressure and a certain temperature. An artificial board.
The advantages of particleboard:
1 The inside is a granular shape with a cross-displacement structure, the performance in each direction is basically the same, and the lateral load-bearing capacity is good.
2 In the production process, the amount of glue used is small, the environmental protection coefficient is relatively high, the surface is flat, the texture is realistic, the weight is uniform, the thickness error is small, the pollution resistance, the aging resistance, the appearance are beautiful, and various veneers can be performed.
3 The finished product does not need to be dried again, it can be used directly, and the sound absorption and sound insulation performance is also very good.
Disadvantages of particleboard:
1 The inside is a granular structure and is not easy to shape.
2 The edge is rough, easy to absorb moisture, and it is easy to cause the phenomenon of tooth on the board. Therefore, some processes have higher requirements on the processing equipment and are not suitable for on-site production.
Second, the MDF (multi-easy shape for tooling)
MDF (also known as fiberboard). It is made of wood material such as trunk material, twig and other plant fiber or other plant fiber. It is heat-grinded (milled into powder). Sizing (urea resin or other suitable adhesive). Drying. An artificial board made by hot pressing.
The advantages of MDF:
1 all kinds of veneer. Adhesive paper film. Veneer. Light metal sheet and other materials can be glued on the surface of the MDF. Various paints. Paints can also be applied to the MDF. The effect is very beautiful.
2 Hard MDF board is punched. Drilling. It can also be made into sound absorbing board. The surface is smooth and flat. The material is fine. The performance is stable. The edge is firm. Easy to shape. Avoid the problem of decay, insects and so on.
3 Physical properties are excellent, the nail holding power is good, the material is uniform, and there is no dehydration problem.
Disadvantages of MDF:
Not moisture-proof. See the water and swell. Long-term load-bearing deformation
Third, the fir board (pushing index 3 hearts)
The fir board is a large-area thick plate (shovel board, large core board; single-core paint-free solid wood board) which is made of short and small materials by means of finger joints. It is generally made of high quality wood (more is pine. Therefore, commonly known as fir board) as a substrate. After high temperature degreasing and drying. Finger joints. Panels. Sanding and other processes.
The advantages of the fir board:
1 After high temperature degreasing treatment. It is made into a warp knot; it is durable. It is free of insects. It does not deform. It also emits a faint scent of wood.
2 is the original natural plate. The wood grain is clear. Natural and generous. There is a natural simplicity to return to nature. The amount of glue is only seven tenths of wood board. Environmentally friendly.
3The surface is sanded and thickened. It is smooth and smooth. When the wardrobe is made, the surface does not need to be attached to the panel. It saves labor and materials. It is economical.
Disadvantages of fir boards:
Poor quality of the fir board. The moisture content is not up to standard. It is easy to deform. It will crack after a long time.
Fourth, multi-layer solid wood board (pushing index 3 hearts)
The multi-layer solid wood board is made of three or more layers of veneer or thin board glue. The splint is generally divided into 3 PCT. 5 PCT. 9 PCT. 12 PCT. 15 PCT and 18 PCT Six specifications of the board. (Pushing index 5 hearts)
Advantages of multi-layer solid wood panels:
1 small deformation. Strong strength. Good internal quality (small hole after cutting saw. No delamination). Flatness is good.
2Structural stability is good. It is not easy to be deformed. It can adjust indoor temperature and humidity well. The surface layer of solid wood skin material has natural and real wood texture and feel.
Five, paint-free solid wood board
Here, in particular, the paint-free solid wood board (melamine surface coating); the inner core has (multi-layer solid wood, and single-core fir), which is now widely used in home decoration, especially the cabinet made in the field.
Ningbo Wellcome Trading Co., Ltd. , https://www.huike-homecare.com